Panasonic DVD-RP62 - Manual (Page 8)

Quick setup Basic play
Ol'Q
■E5i
Sa
(5 w
о to
a-9
QQ
г
0)
&
3-4-5-
2.6
RETURN
Remote control only
The QUICK SETUP screen appears when you press [SETUP] the first
time after purchase and assists you to make necessary settings. You can
access this screen again later if you need to ( “ page 16, Others—QUICK
SETUP).
Preparation
Turn on the television and select the appropriate video input on the
television to suit the connections for the player.
1
2
3
4
5
Press [POWER Ò] to turn on the unit.
Press [SETUP] to show
the QUICK SETUP screen.
i ^
QUICK SETUP
Press [A, ▼] to select the menu language and
press [ENTER].
Press
[A, ▼] to select “Yes” to continue and
press [ENTER].
Press
[A, ▼] to select the item and press
[ENTER].
•Audio Language (For setting details * page 16)
• Subtitle Language (For setting details — page 15)
•TV Aspect (For setting details • "TV Aspect", below)
• Progressive Out (For setting details * page 16)
Press [ENTER] and then [SETUP] to end the
settings.
To return to the previous screen
Press [RETURN].
■ TV Aspect
Select “4:3” (regular) or “16:9" (widescreen) to suit your television.
If you have a regular 4:3 television, you can also select how video on some
discs is shown (• page 16, Video—TV Aspect).
•4:3 Pan&Scan (Factory preset)
Widescreen software is expanded to fill the
screen
of a 4:3 aspect television (unless
prohibited by the producer of the disc),
•4:3 Letterbox
Widescreen software is shown in the letterbox
style on a 4:3 aspect television.
■ Viewing 4:3 aspect pictures on a 16:9 widescreen
television using progressive output
16:9 aspect pictures are shown correctly, but 4:3 aspect pictures are
stretched horizontally to fill the screen.
Ю *11 your television can change the aspect when input is progressive
S Use the television to change the aspect to the correct one.
^ «11 your television cannot change the aspect when input is
progressive
■ Press [PROGRESSIVE OUT] so the indicator goes out. Output will now
be interlace and 4:3 aspect picture is shown in the middle of the screen.
1 Press [POWER c!)] to turn on the unit.
For progressive output
Press [PROGRESSIVE OUT] so the indicator lights.
2 Press [^] to open the disc tray.
3 Place the disc on the disc tray.
Label-up (With double-sided discs, load
so the label for the side you want to play
is facing up.)
4 Press [►] (PLAY).
The disc tray closes and play begins.
S3 (MP3/WMA)
Group and track names are displayed on the television. Press
[SUBTITLE] to turn the display on or off.
To stop play
Press [■] (• page 11, Resume function).
To pause play
Press [I I] during play.
Press (►] (PLAY) to restart play.
CHS
• If “0” appears on the television
The operation is prohibited by the unit or disc.
• Discs continue to rotate while menus are displayed even after playing an
item. Press [■] when you finish to preserve the unit's motor and your
television screen,
•Volume may be lower when playing DVDs than when playing other discs
or during television broadcasts. Reduce the volume before playing other
sources so that a sudden increase in output does not occur.
• Progressive output is not possible if the “Progressive Out" setting is left
as "Disable" in the QUICK SETUP menus.
•Although the progressive out indicator lights if you press
(PROGRESSIVE OUT) after changing the “Progressive OuT setting to
“Enable", output will still only be interlace if you have connected the unit
to your television through the VIDEO OUT or S VIDEO OUT terminals.