To assemble cleaner, Mmihg, Attaching handle to vacuum cleaner – Panasonic MC-V6945 User Manual
Page 6: Using the cord hook
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TO ASSEMBLE CLEANER
A
mmiHG
Electrical Shock Hazard,
Do not plug into electrical supply until assembly is complete Failure to do so could
result in electrical shock or Injury
ATTACHING HANDLE TO VACUUM CLEANER
The vacuum cleaner main body and handle are packed separately
Handle
1 The handle
screw has been
installed for
shipping
purposes
Please
remove the
screw before
inserting
handle Insert
the handle as
shown in the
illustration Make sure the On/Off switch is
IS in the Off position before installing
Insert the screw
that you removed
Be sure the screw
IS tightened, but
not overtightened
There is a recessed area between the
upper cord
Storage
hook base and
the handle that is designed to secure
the cord during vacuuming
Always push the power cord
down in this recess area to help
keep the cord from hanging near
the nozzle and being damaged
Loosely wrap the cord around
both cord hooks Secure the
plug head to the cord by
pushing the cord into the
retainers on the plug head
USING THE CORD HOOK
The upper cord hook has a
quick-release action To
release the cord, rotate the
hook downward and the
complete power cord will
drop off the hook for
immediate use
Do not unplug the power cord by
pulling on the cord Grasp the
plug head and pull to unplug
the vacuum cleaner
Return the hook to the upright
position before attempting to
rewind the cord
- 6 -