Single monitor connection, Multiple monitor connection, System connections – Panasonic WV-BM1410 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1. Single Monitor Connection
SYSTEM CONNECTIONS
WV-BM1410
TV Camera
|-V10EO-|
OVT^IN
1
l" ■
Coax.
Connect the Video Input Connector (VIDEO IN) on this
monitor to the Video Output Connector of the video
source with a coaxial cable.
Set the Video Termination Switch to the 75 position.
Connect the Video Input Connector (VIDEO IN) on this
monitor to the Video Output Connector of the video
source with a coaxial cable.
Connect the Video Output Connector (VIDEO OUT) on
this monitor to the Video Input Connector (VIDEO IN)
on the second monitor with a coaxial cable.
Complete the connections of all monitors in the system
according to the above procedure.
Set the Video Termination Switch to the 75 ii position
on the last monitor and to the HiZ position on the other
monitors.
2. Multiple Monitor Connection
Video Switcher
Last Video Monitor
-
4
-