Panasonic PV-M2037 - Manual (Page 12)

Picture Adjustment
k/
Check list before you begin.
QAII connections are made (see page 5).
□ Your Combination VCR is plugged in.
Push MENU to display
the MAIN MENU.
Push E^to
select “TV” and then
push MENU to display
the SET UP TV screen.
MAFN MENU
SEŒCT : A ▼ < KEY
SET :MEMU KEY
Push A T to select
“VIDEO ADJUST” and
then push [> to
display the VIDEO
ADJUST screen.
------------SET UP TV --
CAPTION ON MUTE:CAP Cl
INPUT SELECT :TUNER
VIDEO ADJUST
SELECT
SET
END A ▼ KEY
► KEY
MENU KEY
Push A W repeatedly
to select the desired
adjust item, and then
push<||>to adjust.
(See description below.)
TINT
BRIGHT
PICTURE
SHARPNESS
NORMAL
SELECT : A ▼ KEY
ADJUST :■< ► KEY
END ;MENU KEY
Picture Adjustment
COLOR Control
To adjust the intensity of the colors.
TINT Control
To adjust for the most natural fleshtones.
BRIGHT Control
To adjust the brightness of the picture.
PICTURE Control
To adjust the intensity of the picture by adjusting contrast and color
level at the same time and in the proper balance.
SHARPNESS Control
To adjust the sharpness of the picture.
To Reset Picture Controls to the
Factory Setting
Push A T and [> to select and set
NORMAL
All controls return to factory settings.
COLOR I........
TINT I........
BRIGHT ..................... I........
PICTURE .............................F
SHARPNESS .............I........
rnilTTCT
SELECT: A ▼ KEY
SET :► KEY
END :MENU KEY
©
1 Push MENU twice to exit the VIDEO
j ADJUST mode.
; • If no button is pushed within 5 minutes, the video
adjust overlay disappears.
Push ^ ^ <1 |>to select “EXIT,” and then
push MENU to exit the MAIN MENU.
12