Cannon Adjustable Rail Mount 1907020 - Manual (Page 5)

5
Replacement Parts
Rod Holder \ Accessory Compatibility
Mounts
Rod Holder
●
- Compatible
○
- Not Compatible * - Compatible with removal of track mount plate
Adjustable Dual Axis
Track Mount Gimbal Track Mount Pedestal Track Mount
● ● ●
Angled Fixed Mount
Adjustable Single Axis
Rail Mount Clamp Mount Deck Mount
● ● ● ○ ○ ○
● * ● * ○
● ● ● ●
*
●
*
●
1904032 Swivel Base Downrigger Pedestal 4”
1904033 Swivel Base Downrigger Pedestal 6”
Cannon’s swivel base downrigger pedestals can be surface
mounted or track mounted for a variety of mounting positions and easy re-
moval. With 16 locking points, these downrigger pedestals allow for 360°
downrigger rotation with locking points every 22.5°. The 3/4” thick aluminum
top plate is pre-drilled and tapped for mounting Cannon downriggers as well
as most Scotty®, Big Jon®, Penn®, Vector, Proos, Fishlander and Walker
downriggers. Bearing system ensures smooth swivel action even while a
downrigger weight is attached. Components are made from clear anodized
aluminum and stainless steel for strength and corrosion resistance. The
swivel base downrigger pedestals are compatible with Cannon, Bert’s, and
Traxstech track systems. Available in 4” and 6” heights.
Mounts
Pedestal
○ ○ ●
6" Sw ivel Mount
● ○ ○
●
- Compatible
○
- Not Compatible
4" Sw ivel Mount
Track Mount Gimbal Track Mount Pedestal Track Mount
● ○ ○
4" Fixed Mount
6" Fixed Mount
Rail Mount Clamp Mount Deck Mount
● ○ ○ ○ ○ ●
○ ○ ●
● ○ ○ ○ ○ ●
Pedestal Mount \ Accessory Compatibility
Part Part Number Description USED ON
3396562 END CAP
1904005, 1904006, 1904010, 1904018, 1904025,
1904026, 1904027, 1904028, 1904029
3390210 VINYL CAP 1907000
3393413 THUMB SCREW 1907000, 1907001, 1907002, 1904005, 1904006
3391515 CAP ROD HOLDER
1907001, 1907002, 1907020, 1907021, 1907022,
1907023
33986110 WEAR TIP
1907001, 1907002, 1907020, 1907021, 1907022,
1907023