Auto configuration), Miscellaneous), Init nvram – Panasonic CF-VDL01 User Manual
Page 13: Osd timeout osd position, Phase, Clock, Auto phase, Osdtimeout, Osd position, Information)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(Auto Configuration)
Auto Configuration
Yes No
(Miscellaneous)
Miscellaneous
INIT NVRam
OSD Timeout
OSD Position
<Phase>
Phase adjustment is used to adjust the ADC sample pixel clock. A slider and the current
value are displayed. The adjustment range is 0 to 31, representing 0-360 degrees.
Adjust by pressing or ^ , then press [
2
). (If you want to cancel, press [T])
<Clock>
Clock adjustment is used to adjust the number of clocks per line (samples per line). A
slider and the current value are displayed. The range of clock adjustment is +/- 30
pixels from the VESA standard.
Adjust by pressing or , then press . (If you want to cancel, press [T])
<Auto Phase>
Select [
2
], phase is adjusted automatically.
Auto Configuration automatically adjusts image position, clock, and phase. A confir
mation box is displayed to confirm the user selection. The default selection in the box
is “Yes”, highlighted by a green bar. If the “No” is selected, the main menu is re
opened and no changes are saved.
The Miscellaneous menu is used to select miscellaneous OSD setting and sub-menus.
Select the item by pressing or ^ , then press [
2
).
<INIT NVRam>
A confirmation box is displayed to confirm the user selection. The default selection is
“Yes”, and is highlighted by a green bar. If Q] is pressed, the previous menu is displayed.
<OSDTimeout>
OSD Timeout is used to set the OSD idle time-out. If no active action, key press or
automatic configuration occurs for the defined period, the OSD menu is closed. There
are four OSD time-out values available.
Seleet the item by pressing or ^ , then press .
<OSD Position>
The sub-menu is displayed.
Select the item by pressing or ^ , then press [
2
].
The sub-menu is displayed.
Adjust by pressing or ^ , then press . (If you want to cancel, press Q] )
□ (Information)
SYSTEM INFO
Version:
V-Freq-:
H-Freq-:
PixelCLK:
Width:
Height :
This menu is used to display information about the system. The OSD window is
displayed for 60 seconds after which control returns to main menu. If (T] is pressed,
the information window is closed and the main menu is displayed.
3
Press Q]
The OSD main menu disappears.
13