Connect your computer to a power outlet, Open the display, Turn your computer on – Panasonic TOUGHBOOK CF-50 User Manual

Page 10: First-time operation

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

First-time Operation

(?) Match the mark on the cover to the body of the computer and slide the cover back

into place. Be sure the tab does not get caught when closing the cover.

If the cover is not attached properly, the battery may fall out while the com-

^puter is being carried.________________________________________________

Connect your computer to a power outlet

-------------------------------------------------

r

• Be sure the AC adaptor is connected until completing Step 8 on page 12.
• When using the computer for the first time, do not connect any peripheral device

except the battery pack and AC adaptor to the computer.

Handling the AC adaptor

• Do not twist or pull the AC power cord forcefully. Doing so may damage the

connections.

• Use only the specified AC adaptor with your computer. Using an AC adaptor other

than the one supplied might damage the battery and/or the computer.

• When the DC plug is not connected to the computer, disconnect the AC cord from

your AC wall outlet.

• Problems such as sudden voltage drops may arise during periods of thunder and

lightning. Since this could adversely affect your computer, an uninterruptible power

source (UPS) is highly recommended unless running from the battery pack alone.

Open the display

(J) Slide the latch located at the front.
@ Lift open the display.

Turn your computer on

Press the power switch and hold it for approximately one second until the power indicator

turns on before releasing it.

• Do not press the power switch repeatedly.
• Once the computer is powered off, you must wait at least ten seconds before pow­

ering it on again.

10

Advertising