Windvd, Installing windvd, Running windvd – Panasonic CF-48 Series User Manual
Page 29: Win dvd^w
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
WinDVD™
<Model with a DVD-ROM drive/Model with a DVD-ROM & CD-R/RW drive/Model with a DVD Multi drive>
WinDVD'^** (hereafter, WinDVD) is a software application for DVD playback.
Here, you will find explanations and general information on the installation procedure and how to access the online manual.
Installing WinDVD
•
Close all other software application before running the Setup program for WinDVD for added safety.
•
Log on as the administrator.
(T) Set the WinDVD CD-ROM in the CD drive.
The
WinDVD
setup
program
will
run
automatically
(allow
some
time
for
disc
recognition).
When
the
setup
program
will
not run automatically, input [x:\setup] in [Start] - [Run] and select [ОК]. (“x”is the drive letter. You can change the letter to
suit your preference.)
Select [Next] at the Welcome Message.
(
3
) After reading the “License Agreement”* *, select [Yes] if you agree to the terms.
* Refer to the “LIMITED USE LICENSE AGREEMENT’ (¿^ page 27)
(
4
) Follow the on-screen instructions and install WinDVD.
<Confirraation of the DVD-ROM drive settings>
To run WinDVD, it is necessary to make the following settings.
Select [Start] - [Settings] - [Control Panel] - [System] - [Hardware] - [Device Manager].
ЕЖЕВЗЯ5В Select [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Man
ager],
@ Double-click [Primary ГОЕ Channel] for [IDE ATA/ATAPI controllers].
@ Select [Advanced Settings], and confirm that [Transfer Mode] is set to [DMA if available] for [Device 0].
@ Double-click [Secondary IDE Channel] for [ГОЕ ATA/ATAPI controllers] and perform as the step .
Running WinDVD
3»
Select [Start] - [Programs] - [InterVideo WinDVD] - [InterVideo WinDVD] or select ^ on the desktop.
Select [start] - [All Programs] - [InterVideo WinDVD] - pnterVideo WinDVD] or select
3L
on the desktop.
<How to access the online manual>
Select “?” of the WinDVD control panel.
•
Do not enter the standby or hibernation mode while WinDVD is running.
•
Do not start WinDVD while the hard disk drive indicator is blinking immediately after the computer was started up.
•
If you maximize the video display window, you can return to the original window size by double-clicking over the
images.
•
During video playback (while the access lamp is on), do not eject the disc.
•
Do not use other applications or the Command Prompt, and do not change the settings of the screen properties.
•
In some cases, when the number of colors for the display is increased, a message appears and the DVD cannot be played.
If this happens, reduce the number of display colors.
•
Immediately after resuming from a pause, frame dropping may occur depending on the operating environment or DVD
video (images or sounds are disrupted).
•
In the Extended Desktop (Dualview) or simultaneous (intemal/extemal) display mode, there are times when images or
video are not displayed correctly.
•
During a prolonged period of rapid advance, the pause mode may be established at some point. If this happens, exit
WinDVD, and restart.
29