Panasonic NV-H65 Series - Manual (Page 14)

Preparation
•Make sure that the ‘Timer Record” is not switched On.
•Insert a recorded video cassette.
When a video cassette is already inside the VTR, press
the VTR On/Off Switch to turn it on.
•Turn the TV set on and select the video playback channel.
When a video cassette which has the erasure prevention
tab removed is inserted, playback will start automatically.
Press the Rewind ◄-^/Review @ Button to rewind the
tape.
it shows the elapsed recording or playback time.
REW/Q
<K] * * * * *
1
_ J
Press the Fast Forward ►►/Cue © Button to wind the
tape forward rapidly.
r
®/FF
>1
1»
J
The Memory function makes it simple and fast to find a
certain position on the tape later again, simply by pressing
the Reset Button at that position to set the tape counter to
“0:00.00” and by pressing the Memory/Search Lock
Button. During Rewind or Fast Forward, the tape will then
stop at approximately the desired position.
r
Memory--------,
Indication
J,
M
COUNT
V
n • n n n n
u • u u. u u
! Hour
n n
u.. u
n
u.
Second
I Minute
I
The indication wilt appear when the tape is
rewound further than the tape counter position
“ 0 : 00 . 00 ”.
•If the figures on the Tape Counter do not change
during Fast Forward, Rewind or any of the
playback functions, this means that nothing is
recorded on that tape section.
•The Tape Counter is automatically reset to
“0:00.00" when the video cassette is ejected.
Press the Play Button (►).
r--------------------------------------
PLAY
>
•Adjust the Tracking Control on the VTR if the image is
partially obscured by bands of noise.
•Control the picture as you like with the Picture
Sharpness Control (sharp or soft contours).
14