OEM Controls CANBus Product Line - Manual (Page 16)

OM-17288
CANBus USERS MANUAL Page 16 of 38
Revision C
GJO*07-12-06
ORIGINAL
POR menu [ Menu Screen 0 ]
Part Number and Serial Number
Restore Factory Defaults
“PRESS SELECT” is blinking.
The above three screens are in the MAIN menu. Use <UP> and <DOWN> to select one for viewing.
Press <MENU> to go to the following screen.
Top Level selection menu
“ADJUST” is blinking
Use <UP> and <DOWN> to select one of the menu choices (which will be flashing) and then
press <MENU> to go there.
Press <EXIT> to return to menu screen 0.
RUN MODE: NORMAL
FUNCTIONS OFF RUN: DRIVE FWD
Fn1A 50.5 %
ADJUST CAN BUS
IO TEST MAIN CAN BUS
IO TEST MAIN
PN: OCI1-103.000
SN: 000000001
RESTORE DEFAULTS
PRESS SELECT RESTORE DEFAULTS