STIEBEL ELTRON ULTRONIC 2 W User Manual

Page 8

Advertising
background image

8

| ULTRONIC

1 / ULTRONIC

2 TOUCHLESS AUTOMATIC HAND DRYERS

WWW.STIEBEL-ELTRON-USA.COM

INSTALLATION

ELECTRICAL CONNECTIONS

8. Electrical

connections

26

_0

7_

32

_0

0

45

1

1 Wiring

block

Install a 1/2˝ electrical connector in the back part of

housing in the hole located below the wiring block
(1, above).

Feed wires through connector; tighten clamp down

on wire.

The “live” wires must be connected to the slots

on the terminal marked N/L and L. The ground
wire must be connected to the slot on the terminal
marked with the ground symbol.

85

_0

7_

32

_0

0

02

Put the housing back onto the front of the unit.

Lift upward to reengage the hooks into the

attachment eyelets.

Press the housing down gently so it locks in place.

1.

2.

3.

26

_0

7_

32

_0

0

42

Turn the two screws a full turn counterclockwise to

stop.

26

_0

7_

32

_0

0

43

Advertising
This manual is related to the following products: