STIEBEL ELTRON CKT 20 E - Manual (Page 4)

opEraTion
applianCE DEsCripTion
4 | CK 15-20 E / CKT 15-20 E www.sTiEbEl-ElTron-usa.Com
!
WARNING Injury
Where children or persons with limited physi-
cal, sensory or mental capabilities are to be
allowed to control this appliance, ensure that
this will only happen under supervision or after
appropriate instructions by a person respon-
sible for their safety.
Children should be supervised to ensure that
they never play with the appliance.
CAUTION Burns
The casing surfaces of the appliance and the
expelled air become hot during use (above 90 °C
(194 °F)). To prevent burns ensure that the hot
surfaces never come into contact with bare skin.
2.3 general information
!
Damage to the appliance and the environment
- Never cover this appliance.
- Never step on the appliance.
2.4 test symbols
See type plate on the appliance.
2.5 licences / certificates
- ETL (USA)
- C-ETL (Canada)
3. appliance description
This appliance is wall mounted and is particularly suit-
able for work rooms, kitchens, bathrooms, wash rooms
and similar.
The external casing of the appliance is made from stove
enameled sheet steel. The sides are made out of plastic.
The controls are located on the right side panel.
The quiet fan draws in the ambient air that is heated by
a bare wire heater element. The air then exits evenly
through the hot air channel and the air outlet grille set
into the bottom of the appliance.
The appliance heats up the ambient air inside the room
and maintains it at the selected temperature.
3.1 Control with external room temperature control-
ler
(Only applicable for: CK)
In rooms larger than 20 m 2 (215 sqft) you can operate
the appliance with a conventional wall mounted room
thermostat.
fTo do so, turn the temperature selector fully
clockwise.
fControl the temperature by using the wall thermostat.
4. Operation CK 15 e / CK 20 e
1
26
�0
7�
31
�0
21
1
1 Temperature selector
4.1 starting heating
The temperature is infinitely adjustable. The appliance
stops heating as soon as the selected room temperature
has been reached.
fTurn the temperature selector clockwise to the re-
quired setting.
4.2 stopping heating / frost protection
fTurn the temperature selector fully counter clockwise.
This position ensures frost protection. The heater starts
automatically if the room temperature drops below the
frost protection temperature.