Cleveland Range Convotherm PC-Control - Manual (Page 15)

Operating Instructions
3. CONVOTHERM PC-Control
page 1
10 July 2006 CONVOTHERM PC-Control
3.1 Software Installation, Setup, and Startup
• Running the CONVOTHERM PC-Control software requires a dongle.
• For viewing Programs, the software can be run without a dongle.
• Without a dongle, some functions, including saving Programs and sending Programs to
the Combis cannot be used.
Installation of the Convotherm PC-Control Software
1. Insert the dongle in the parallel printer interface (LPT).
2. Install the PC-Control software using the same procedure as the PC-HACCP software.
3. For easier Program startup, place a shortcut to the PC-CONTROL.EXE on the desktop
or in the Autostart directory.
3.2 Create a Cookbook on the PC
• After starting this program, a list containing all the Program numbers is displayed.
• Free and assigned Program numbers are displayed differently in this list. See below.
= free Program number = assigned Program number
• The
Programming window is opened by double clicking on a Program number.
• The buttons used in this window are the same as the Keypad icons on the Combi
control panel.