Uncaged Ergonomics WorkEZ Standing Desk - Manual

WorkEZ Standing Desk
User Manual
WorkEZ ™ Standing Desk
converts any table into an adjustable, ergonomic sit-stand desk.
3. Mouse pad - Adjustable panel to hold
you mouse at the optimal height and angle.
2. Keyboard Tray lets your wrist droop down
naturally in the healthiest typing position.
1. Monitor Stand adjusts in height from 0-2ft
to hold monitors and laptops at eye-level.
Aluminum naturally dissipates heat to cool
laptops.
The 3 separate components ensure that you compute with the healthiest body posture.
Key Features of the Keyboard Tray & Monitor Stand
Each joint is measured in 15° increments.
Joints lock in place every 15°.
To operate a joint, depress the button and rotate the leg to
the desired angle.
➪ Once the button is depressed, joints rotate in a
complete circle or 360°
➪ The joint is locked when the button is extended. Only
use WorkEZ™ when all joints are locked.
Joint A
Joint C
Joint B
Joint A
Joint C Joint B
For more information please visit: UncagedErgonomics.com
Or contact us: 240.583.0517 /
[email protected] Disclaimer :
Buyer accepts full liability for any injury or loss to themselves, their property, and anyone else at any time and from any cause
while using this product. Buyer expressly releases Uncaged Ergonomics and its agents from any liability for such loss or injury. In
no event shall Uncaged Ergonomics or its agents be liable for any direct, indirect, punitive, incidental, damages or injury
whatsoever arising out of or connected with the use or misuse of its products.
When adjusting,
be wary of your
fingers.
Max load is 13 lbs.
Joints must be locked (extended) before use.
Before use, ensure that:
All joints are locked (extended)
The platform is level
Both legs are adjusted identically and evenly
WorkEZ™ is stable
The platform weight is centered over the
bottom leg