Windy Nation SOL-AJBR-01 Adjustable Tilt Solar Mount - Manual

Adjustable Tilt Solar Mount
SOL-AJBR-01
ITEM # DESCRIPTION QUANTITY
1 Aluminum Mounting Rails (22”) 4
2 Aluminum Tilt Angle Bracket (11.25”) 2
3 Steel Knob Bolt 6
4 Steel Wing Nut 6
5 Steel Flange Nut 4
6 Steel Module Bolt 4
7 Steel Flat Washer 4
The Windy Nation Adjustable Tilt Bracket is the perfect solution to mount a solar panel to the roof of your Recreational
Vehicle (RV) or any other flat surface, allowing the tilt angle of the solar panel to be adjusted for optimum performance.
INSTALLATION
CAUTION:
When solar panels are placed in light sources, they produce electrical energy and a voltage will appear on the output terminals. To
avoid a shock hazard, keep the panel covered with a dark material during installation and avoid contact with the output terminals.
NOTE:
Stainless Steel threads may seize do to “galling”. It is recommended to apply anti-galling lubricant (available at most hardware or
auto-parts stores) or any lubricant to all the stainless steel fasteners before installation.
NOTE:
The SOL-AJBR-01 Solar Tilt Mount is capable holding a maximum of one 140 Watt solar panel.
Determine the mounting location of the solar panel on the RV roof or flat surface that is clear of any obstructions and will have
sufficient space to access the panel for servicing should it be required. Ideally, the panels will be positioned to minimize the wiring
distance between the solar panel and the charge controller
Make sure the mounting surface is strong enough to handle the weight bearing load of the solar panels. If the panels will be
mounted on a roof, make sure the material is strong enough to provide support to the solar panel including wind loading. To
minimize wind loading effects in an RV or mobile application, place the panel’s longest edge parallel with the direction of wind travel.
Page 1 of 2 windy nation Adjustable Bracket Manual Rev 1.0