COBY electronic DVD-468 - Manual (Page 11)

System Setup
MENU OPERATION
1. In DVD mode, press [SETUP] on the remote control to display the setup menu.
2. Press [ ]/[ ] to select an item. The submenu of the selected item will be displayed below instantly.
3. Press [ ]/[ ] to select an item you desire to set in the submenu, then press [ENTER] /[ ]to enter. Use [ ]/[ ] to
select an option, then press [ENTER] to confirm it, or press [ ] to cancel.
4. Then you can press [ ]/[ ] to continue to set other items in the submenu.
5. Press [ ] to go back to the .
6. Press [SETUP] again to exit the setup menu. move the highlight to ' ', then press [ENTER] to exit
the setup menu.
1 GENERAL SETUP PAGE
1.1 TV DISPLAY
If the unit is connected to a conventional TV set, 4:3 PANSCAN or 4:3 LETTERBOX. The 4:3 image will be
displayed in full screen in its native aspect ratio.
4:3 PANSCAN: The wide-screen image will be displayed on the screen in its native aspect ratio with some part on
the left and right cut off.
4:3 LETTERBOX: The wide-screen image will be displayed in its native aspect ratio with black bands on the upper
and lower sections of the screen.
If the unit is connected to a wide-screen TV set, 16:9 or WIDE SQUEEZE.
16: 9: The wide-screen image will be displayed in full screen in its native aspect ratio while the 4:3 image will be
stretched out horizontally to fit in the screen.
WIDE SQUEEZE: The wide-screen image will be displayed in full screen in its native aspect ratio and so does the
4:3 image but with black borders on the left and the right side.
1.2 ANGLE MARK
Set this item to ON. When a disc encoded with multiple camera angles is playing, the angle mark will display on the
screen. Then you can view the video different camera angles by pressing [ANGLE] on the remote control.
Set this item to OFF to disable this function.
NOTE: This function only works encoded with multiple camera angles.
previous menu
Alternatively,
select
select
in
with discs
-10-