English, Apx/dpx amplifiers 17 – Clarion DPX2250 User Manual
Page 17
APX/DPX Amplifiers
17
English
Four-channel high-power system (APX4360)
In this application, the APX4360 is used as a four-channel amplifier to drive four
speakers in stereo with fader control.
FRONT
REAR
12V
+
REM
GND
FUSES
BRIDGED (4
)
+
+
-
-
RIGHT
LEFT
+
+
-
-
2
2
Four speakers in stereo—full range
• Set crossover mode switch to OFF
Four speakers in stereo—filtered
If the front or rear speakers are smaller than 5.25”, you may decide to enable the
crossover. The following apply to the front or rear channels with the small speakers.
• Set crossover mode switch to HP
• Set crossover frequency to ~200Hz for 4-inch speakers
~350Hz for 3.5-inch speakers
2
Ω
2
Ω
Front left
Full range
Front right
Full range
Rear right
Full range
Rear left
Full range
APX-DPXOwnersManual.pmd
2006-03-14, 21:47
17