360 Systems RC-220 Remote Controls - Manual (Page 15)

RC-205/210/220 Remote Control Owner's Manual Second Edition March 1997 Page
13
CABLE INTERCONNECTION BETWEEN RC-210 AND DIGICART
Check the REMOTE ADDRESS selection under the SETUP MENU on the
DigiCart. This should be set to ADDRESS 01 for the RC-210.
The Remote Control should be connected before powering up the DigiCart.
If the Remote is connected after the DigiCart's power is turned on,
simultaneously press the SEC and FILE XFER (DNET XFER on DigiCart/II
Plus) buttons on the DigiCart's front panel. This will "soft boot" the DigiCart
and re-initialize the system.