ALFA NETWORK AWUS048NH - Manual (Page 25)

Wireless 11N USB Adapter
The following table describes the items found on the Status screen.
Items Information
Manufacturer
The name of manufacturing this product
NDIS Driver Version
The version of Network Driver Interface Specification
Encryption
Here displays the encryption type the device is using
Authenticate
This shows whether the server based authentication is used.
Channel Set
Appears the country you use.
MAC Address
The MAC address of the wireless network adapter.
Data Rate(Auto)
Show current transmit rate and receive rate
Channel Frequency
Shows the channel in use (1~14)
Status
Current connection status
SSID
The SSID of the wireless system.
Network Type
The type of network and the station currently connected are shown
here. The options include : Infrastructure, Ad Hoc
Power Save Mode
The power save mode have three mode, as follows :
• Max - Selects maximum mode to let the access point buffer
incoming messages for the Adapter. The Adapter will detect the
access point if any messages are waiting periodically.
• Min – Min mode uses minimum when retrieving a large number of
packets, then switches back to power save mode after retrieving
the packets.
• None - Turns power saving off, thus powering up the Wireless
USB Adapter continuously for a short message response time.
Associated AP MAC
The MAC Address of associated AP
Up Time
Record life time
3.2.7 Statistics
Statistics page displays the detail counter information based on 802.11 MIB counters. This page
translates the MIB counters into a format easier for user to understand. It show receiving and
transmitting statistical information about the following receiving and transmitting diagnostics for
frames received by or transmitted to the wireless network adapter.
- 25 -