ALFA NETWORK Bridge5-24 - Manual (Page 12)

12
◆ Server IP — Sets the L2TP server IP Address. (Default: l2tp_server)
◆ User Name — Sets the L2TP user name for the WAN port.
◆ Password — Sets a L2TP password for the WAN port.
◆ Address Mode — Sets a L2TP network mode. (Default: Dynamic IP)
◆ Operation Mode — Enables and configures the keep alive time.
◆ Primary DNS Server — The IP address of the Primary Domain Name Server. A
DNS maps numerical IP addresses to domain names and can be used to identify
network hosts by familiar names instead of the IP addresses. To specify a DNS
server, type the IP addresses in the text field provided. Otherwise, leave the text
field blank.
◆ Secondary DNS Server — The IP address of the Secondary Domain Name Server.
3)
Network Name (SSID) — SSID (Service Set Identification) must be assigned to all
wireless devices in your network. Considering your wireless network security.
Security Mode — Select the security method and then configure the required
parameters. (Options: Disabled, WEP-AUTO, WPA-PSK, WPA2-PSK, WPA-Auto-PSK,
WPA, WPA2, WPA-Auto, 802.1X; Default: Disabled)
S ETTINGS
–
IPS EC
1) Select IPSec, if you are using IPSec service to gain connection to the Internet.
2)