ALFA NETWORK R36 - Manual (Page 50)

50
WPS Summary — Provides detailed WPS statistical information.
◆
WPS Current Status — Displays if there is currently any WPS traffic connecting to
the 3G Mobile Wireless Router. (Options: Start WSC Process; Idle)
◆
WPS Configured — States if WPS for wireless clients has been configured for this
device.
◆
WPS SSID — The service set identifier for the unit.
◆
WPS Auth Mode — The method of authentication used.
◆
WPS Encryp Type — The encryption type used for the unit.
◆
WPS Default Key Index — Displays the WEP default key (1~4).
◆
WPS Key (ASCII) — Displays the WPS security key (ASCII) which can be used to
ensure the security of the wireless network.
◆
AP PIN — Displays the PIN Code for the 3G Mobile Wireless Router. The default is
exclusive for each unit. (Default: 64824901)
◆
Reset WPS to Default — Resets the WPS settings to factory default values.
WPS Config — Configures WPS settings for the 3G Mobile Wireless Router.
◆
WPS Mode — Selects between methods of broadcasting the WPS beacon to
network clients wanting to join the network:
■ PIN: The 3G Mobile Wireless Router, along with other WPS devices, such as
notebook PCs, cameras, or phones, all come with their own eight-digit PIN code.
When one device, the WPS enrollee, sends a PIN code to the 3G Mobile Wireless
Router, it becomes the WPS registrar. After configuring PIN-Code information you
must press ―Apply‖ to send the beacon, after which you have up to two minutes to
activate WPS on devices that need to join the network.
■ PBC: This has the same effect as pressing the physical WPS button that is located
on the front of the 3G Mobile Wireless Router. After checking this option and clicking
―Apply‖ you have up to two minutes to activate WPS on devices that need to join the
network.