Compaq V6500 - Manual (Page 77)

2 . Remove the ExpressCard slot bezel (2) from the ExpressCard slot.
NOTE: The ExpressCard slot bezel is included in the Plastics Kit, spare part number 438669-001.
3 . Remove the three Phillips PM2.5×4.0 screws (1) that secure the ExpressCard assembly to the system
board.
4 . Disconnect the ExpressCard assembly (2) from the system board by sliding it to the right.
5 . Remove the ExpressCard assembly (3).
Reverse this procedure to install the ExpressCard assembly.
Component replacement procedures 69