Lcd display – AvaLAN Wireless AW900iTR-PAIR User Manual
Page 12
Advertising
AW900iTR
User’s Manual
PAGE 12
Technical Support (650) 384-0000
www.avalanwireless.com
LCD Display
During boot up:
1. Current Version
2. Serial Number
3. IP Address*
NOTE:
*When configured for DHCP mode, the display will look like the image above at boot
up. If it fails to recieve an IP address within 20 seconds, it will default back to the IP address
used prior to reboot. The factory default IP address is 192.168.17.17. Once an IP address
is assigned it will be displayed. When configured for static IP mode, the IP address will be
immediately shown in the display.
After boot up LCD will display:
Channel: CH (current channel)
Down arrow (Received (RX))
Up arrow (Transmit (TX))
Device type: AP or SU
Link Quality
Advertising