AvaLAN Wireless AW2400S-PAIR - Manual (Page 4)

High Security Supplement
PAGE 4 Technical support (650) 384-0000 www.avalanwireless.com
© 2012 by AvaLAN Wireless Systems, Inc. All Rights Reserved. Version 04.20.2012
5. Next, you will be provided with a popup to en-
ter the encryption key and method (128, 192 or
256-bit). (You will be forced here if you are reset-
ting, or can choose "Input Key" after logging in. The
encryption key is a hexadecimal number, 32 digits
for 128-bit encryption, 48 digits for 192-bit and 64
digits for 256-bit. Enter the digits as 0 - 9 and a - f
or A - F (case independent). If you enter fewer than
the specified number of digits (not recommended),
the remainder will be padded with zeros.
6. Once the encryption module has been pro-
grammed, you may login to access the other fea-
tures. "Self Test Results" will simply display "Self
Test Passed" in the status box. If it does not, con-
tact AvaLAN Technical Support. Module Firmware
Version displays that information in the status box
and may be useful to the aforementioned AvaLAN
Technical Support staff.
7. When you are finished with the configuration of the encryption module, discon-
nect the USB cable and replace the cap on the connector. Then cycle power through
the LAN cable to restore the wireless radio to normal operation.