AvaLAN Wireless AW-900mT - Manual (Page 7)

aW900mT User’s Manual
PaGe 7 www.avalanwireless.com Technical support :: (650) 384.0000
Appendix A — Agency certifications
FCC Certification
The AW900mT OEM RF Module complies with Part 15 of the FCC rules and regulations. Compliance with labeling requirements, FCC notices and
antenna regulations is required.
Labeling Requirements
In order to inherit AvaLAN’s FCC Certification, compliance requires the following be stated on the device:
Figure 1. Required FCC label for OEM products containing the AvaLAN AW900mT OEM RF module
The Original Equipment Manufacturer (OEM) must ensure that FCC labeling requirements are met. This includes a clearly visible label on the outside
of the final product enclosure that displays the contents shown in the Figure 1.
User’s Manual Requirements
In order to inherit AvaLAN’s FCC Certification, compliance requires the following be stated in the user’s manual:
FCC Notices
Adherence to the following is required:
IMPORTANT: The AW900mT OEM RF Modules have been certified by the FCC for use with other products without any further certification (as per
FCC section 2.1091). Changes or modifications not expressly approved by AvaLAN could void the user’s authority to operate the equipment.
IMPORTANT: OEMs must test their final product to comply with unintentional radiators (FCC section 15.107 and 15.109) before declaring compliance
of their final product to Part 15 of the FCC Rules.
IMPORTANT: The AW900mT OEM RF Modules have been certified for fixed base station and mobile applications. If modules will be used for portable
applications, the device must undergo SAR testing.