Aviom AN-16/i v.2 - Manual (Page 49)

41 AN-16/ i v .2 i Nput M odule u ser G uide
Setup at Front-of-House (FOH)
Place the following at front-of-house:
one AN-16/i v.2 Input Module •
one • AN-16/o Output Module
one AN-16SBR •
Make these connections:
Set the 1. Slot Range switch on the AN-16/i v.2 Input Module to 1-16.
Connect the 2. A-N
et
O
ut
of the AN-16/i v.2 to port D on the System Bridge.
Connect the 3. A-N
et
I
N
of the AN-16/o Output Module to port A on the System Bridge.
Finally, connect the stage to the FOH position with a Cat-5 cable connected between the 4.
two B
rIDge
ports on the System Bridges.
A B C D
PRO16
PORTS
The FOH configuration
P N
ote
: Remember that the maximum cable distance must not exceed 400 feet (122 meters)
measured from the AN-16/i v.2 on stage to the AN-16/o at FOH.