Aviom 6416Y2 - Manual (Page 23)

13 c
ontrol
m
aster
c
oNtrol
m
aster
In every Pro64 network, one device will always be designated as the Control Master, the device that manages all
A‑Net resources for the network. The Control Master can be any I/O module in the network, and can be assigned
or changed by the user as needed. Only one device can be assigned as Control Master in a Pro64 network at a
time; an A‑Net Pro64 network cannot function without a Control Master.
The functions of the Control Master include:
System resource and information management •
Management of • active channels (Slots)
System‑level command and control functions •
Keeping track of all Pro64 devices in the network (by type and quantity) •
Control of the current system‑wide • sample rate
• Clock Master (analog modules only)
System lock via
• password on/off for supported devices
Management of • Virtual Data Cable (VDC) resources
Management of • stereo link status
Requests to enter • Managed Mode for control with Pro64 Network Manager software
Communication with • Pro64 Network Manager software when configuring and managing a
network using a PC
The Control Master status is identified with a red LED on the front panel of the device currently assigned as the
Control Master. Depending on the type of device (rack‑mounted I/O module, AllFrame, or digital console interface
card), the method used for designating Control Master status may be different.
The Control Master LED is labeled CTL on the 6416Y2 card.
RS–232/422
STEREO LINK
6416
Y2
B A
ON
CTL CLK AUTO ERR
1 2 3 4 5 6 7 8 9 10 11 12
The Control Master LED (CTL) on the 6416Y2 card