AYRE K-3 - Manual (Page 7)

Remove the old label by using a small object (such as an
allen wrench) to push through the access holes on the rear of
the faceplate. The labels have a self-adhesive backing, and
new ones are simply pressed into place.
2XWSXWV
Both pairs of outputs may be
used simultaneously.
However, please note that the
level of the unbalanced output
will be 6 dB lower than the
balanced output.
The Ayre K-3x offers one pair of balanced outputs and one
pair of unbalanced outputs.
Please note that the unbalanced outputs invert
absolute polarity.
When using an unbalanced connection between the Ayre
K-3x and your power amplifier, it is suggested that the
speaker cables’ “plus” and “minus” leads be reversed at the
amplifier. This will restore absolute polarity and can
enhance the sense of realism on many recordings.
Record Listen
Mute
A y r e
Phono
Video
Disk
Infrared Remote
Control Receiver 1.5 dB Steps 2.0 dB Steps
2.0 dB Steps
Input #1
Input #4
Unity Gain
Status Indicator
Red = Warm-Up
Green = Mute
Blue = Listen
4.0 dB Steps 3.0 dB Steps
O f f Tape
Page 5