10 trouble shooting 11 specifications – Bio Bidet BLISS Premier Class Bidet Seat User Manual

Page 13

Advertising
background image

Trouble

Cause

Remedy

1. The water tank is not filled.

2. The shut off valve is closed.

3. Freezing inside the main unit or the

water supply pipe.

1. Disconnected the power cord.

2. The seat is not occupied.

3. The battery of remote controller is

exhausted.

(Only BB-2000 model)

1. Check the water supply system

1. The water pressure level is set to

“LOW”.

2. The strainer is clogged.

1. The water temperature is set to

“LOW”.

2. Continuous operation has depleted

the supply of warm water.

1.The seat & dryer temperature is set

to “LOW”.

1. Wait about one minute.

2. Press the desired washing button once

again.

3. Turn on the shut off valve to open.

4. Heat the room (for about two hours).

Operating the unit while parts are

frozen will cause a malfunction.

1.Connect the power cord.

2. Check the power supply system in

your house.

3. Occupy the seat (The unit has an

occupied sensor).

4. Replace the battery.

1. If water is leaking from the main unit,

call the service center or the place you

purchased unit.

1.Set the water pressure to “HIGH”.

2.Clean the strainer.

1.Set the water temperature to “HIGH”.

2. Wait about three minutes.

1. Set the seat & dryer temperature to

“HIGH”.

The washing water
does not spray

The unit is not
operating

Water is leaking

The washing water
pressure is weak

The washing water
is not warm

The seat and dryer is
not warm

Feminine Wash

Wash

Device

Heated Seat

Warm

Air Dryer

Device

Posterior Wash

Water Pressure

Adjustable

Warm Water
Temperature

Heater

Safety Devices

Temperature

Heater

Safety Device

Adjustable Dry Temperature

(Room Temp~45 )

Deodorizer

Turbo& Vortex Function

Remote control

Inlet water temperature

3 ~ 35

( 37.4

~ 95

)

3 ~ 40

( 37.4

~ 104

)

Ambient Temperature

Dimension

Weight (kg)

Heater

(250W)

Safety Device

(Themal fuse, bimetal)

Power Rating

Power cord

Type

Water inlet type

Water inlet pressure

Specification

Direct Inlet flow type

0.4 ~ 7.5 kgf/ ( 5.69 psi ~ 106.7psi )

1.2m (4 feet): AMERICA

Max. 0.7 /min ( Max. 0.32 GPM )

Max. 0.7 /min ( Max. 0.32 GPM )

5 Levels

Room Temp - 40

( Room Temp. 104

)

1340 W

Thermal fuse, Thermal switch, Float switch

Room Temp ~ 41

( Room Temp. ~ 105.8

)

55 W

Thermal fuse

4.9kg

4.8kg

BB-1700

BB-2000

-

-

W : 460mm / L : 531mm / H : 152mm

W : 392mm / L : 531mm / H : 152mm

America or Canada: 120Vac, 60Hz, 1400W

Elongated(Control)

Elongated (Remote)

Installation Manual and Operating Instructions

24

25

10 Trouble Shooting

11 Specifications

MAINTENANCE

Advertising