Brookfield QTS25 Texture Analyzer - Manual (Page 5)

QTS MATERIALS EVALUATION SYSTEM OPERATOR MANUAL
Page 5
3. QUICK START INSTRUCTIONS
N.B. Before using the QTS25 Materials Evaluation System please refer to the
important information contained in the Health and Safety section of this
manual.
a) Connect the 'QTS Controller' keypad.
b) Connect the mains lead and switch on.
c) Press 'PROGRAM' and specify required test method details.
d) Select probe or fixture and attach to loadcell using adapter if required.
e) Press 'RUN TEST' and select required test method.
f) Enter 'Batch Number' if required.
g) Place sample into instrument and adjust beam position as required using arrow keys.
h) Press 'ENTER' to start the test.
i) To repeat the test return to g. above.
N.B. To abort a test depress the 'ABORT' key, or in case of emergency the
'Emergency Stop' button.