Compatible Systems QUAD 10/100 RIOP OCTAL V.35 - Manual (Page 3)

Table of Contents
i
Introduction to the Octal V.35-Quad 10/100 RIOP 1
Chapter 1 - Network Installation 2
Connecting the Octal V.35-Quad 10/100 to the Ethernet 2
Telco Line Connection Requirements 2
Connecting a Line Device to the V.35 Interfaces 3
Connecting a Management Console 3
Powering Up the Router 3
Chapter 2 - Quickstart Instructions 4
E THERNET I NTERFACE C ONFIGURATION 4
IP Protocol 4
Required for IP 4
Suggested for IP 5
IPX Protocol 5
Required for IPX 5
Suggested for IPX 5
AppleTalk Protocol 5
Required for AppleTalk 5
Suggested for AppleTalk 5
DECnet Protocol 6
Required for DECnet 6
Suggested for DECnet 6
WAN I NTERFACE C ONFIGURATION 6
Physical Communications Settings 6
PPP Configuration 6
WAN Link Configuration 6
Required for Dedicated/Leased Line Operation 6
Suggested for Dedicated Line Operation 6
IP Protocol 7
Required for IP 7
Suggested for IP 7
IPX Protocol 7
Required for IPX 7
AppleTalk Protocol 7
Required for AppleTalk 7
DECnet Protocol 7
Required for DECnet 7
Suggested for DECnet 8
Frame Relay Configuration 8
WAN Link Configuration 8
Required for Dedicated Line Operation 8
Suggested for Dedicated Line Operation 8
Frame Relay DLCI Mappings 8