BUCHI Rotavapo R II - Manual (Page 29)

5 Putting into operation
29 R II Operation Manual, Version E
5 .5 Installing the condenser and the seal
When installing the condenser and mounting the
seal, consider the following order:
• Insert the vapor duct c until a click sound is
heard.
• Fix the seal b to the condenser a.
• Screw on the condenser with the flange
screwed connection e (normally, the flange
screwed connection must not be removed).
• Screw the Combi-Clip d onto the vapor duct.
Fig. 5.3: Exploded view of condenser and seals
5 .6 Mounting the support rod (optional accessory)
The support rod with bracket and plastic clip is
used with the glass assemblies V, C, S, BY and
CR. It is optional and has the sole purpose of
providing additional stability. We especially rec-
ommend it for the glass assemblies C and CR.
To attach the support rod to the drive unit, pro-
ceed as follows:
• Insert the support rod b into the hole c on
the drive unit.
• Secure the support rod by means of the
screw d.
• Fasten the clip a at the desired height by
means of the wing nut.
Fig. 5.4: Mounting the support rod