California Faucets Grab Bars User Manual

Page 2

Advertising

Escutcheon

with o-ring

Slide escutcheons over grab bar and position
against finished wall. Applies to all intallation types.

Side View

Fig. 9

Please refer to Finish Care Instructions for complete

cleaning information. Wipe frequently with a soft, damp

cloth. Never use acids, harsh abrasives or detergents

IMPORTANT CLEANING NOTICE

Finished

Wall

Horizontal Installation.
Install horizontal bracing (2x4 studs) in wall, flush with front edge of vertical studs.
Mount 2x4 studs sideways between as many studs as necessary depending on grab bar length and desired position on wall.
Secure with 4 "L" brackets to be secured with 8 x 1 ½" Truss Head Wood Screws (not supplied).

NOTE: Position grab bar so mounting plates are centered horizontally on 2x4 studs See Fig. 5.
Install grab bar with mounting plates centered horizontally on both studs using six screws supplied. If wall is thicker than 1/2"

sheetrock or similar material, longer screws (not supplied) will be required to provide secure anchoring.

Diagonal Installation.
Install horizontal bracing (2x4 studs) in wall, flush with front edge of vertical studs.
Mount 2x4 studs sideways and diagonally between as many studs as necessary,depending grab bar length and desired

diagonal position on wall. Secure with 4 "L" brackets to be secured with 8 x 1 ½" Truss Head Wood Screws (not supplied).

NOTE: Position grab bar diagonally so mounting plates are centered on horizontal part of 2x4 studs See Fig. 10.
Install grab bar diagonally with mounting plates centered horizontally on both studs using six screws supplied. If wall is
thicker than 1/2" sheetrock or similar material, longer screws (not supplied) will be required to provide secure anchoring.

Front View

2 - "L" Brackets
(Not supplied)

2x4
Studs

Front View

Fig. 7

Fig. 5

Fig. 6

Fig. 8

2x4
Studs

Vertical
Studs

2x4
Stud

Advertising

Popular Brands

Popular manuals