Cowon Systems 7 - Manual (Page 37)

37
iAUDIO 7
- Excessive JetEffect settings may strain sound and generate noise.
- For further information regarding JetEffect, refer to BBE MP at our website: www.COWON.com
Using Advanced Settings
7. Advanced EQ Filter Setting
●
Frequency allows you to adjust the center frequency as a standard of the EQ value for each EQ band.
●
Bandwidth allows you to adjust the EQ-applied bandwidth for each EQ band.
If the bandwidth becomes Wide, the EQ value will be applied to a broader band based on the center
frequency.
8. Play Speed
●
Controls the speed of music playback in the range of 70%-110% (does not support for files with sampling
rate less than 44kHz).
9. JetEffect Preset
●
To save current JetEffect settings or load the previous settings, touch and hold “PLAY” button to open
pop-up window and select SAVE or LOAD.
4.3 Play Mode
1. Boundary
●
Function that sets the playback section of files and folders. Various playback ranges can be set. Boundary
function is not available for recorded MP3 files.
· All: Plays all tracks in all folders.
· Single: Plays only one track.
· Folder: Plays files in the current folder.
· Subfolder: Plays files in the current folder including its subfolders.
●
If tracks in DPL or Bookmark are played, boundary will automatically be set to the list. When a track in a
general folder is played while tracks in DPL or Bookmark are being played, it automatically changes to
normal boundary settings.
2. Repeat
●
Within the range specified in the boundary, repeat playback can be set.
3. Shuffle
●
Within the range specified in Boundary, random playback can be set.
●
If enabled, files within the range are randomly played.