Step 5: attach the cable to the handlebar assembly – Country Home Products EM 4.1 User Manual

Page 16

Advertising
background image

12

NEUTON EM 4.1 Cordless Electric Mower Safety & Operating Instructions

Step 5: Attach the Cable to the Handlebar Assembly

1.

Run the cable through the cable guide tab
(Figure 6) on the right lower handlebar section.

2.

Align the half-moon cut-out on the cable end
(Figure 7) with the cable housing on the handlebars,
and slide together.

3.

Hand-tighten the locking nut to connect the cable
(Figure 8).

Figure 6. Cable guide on the
handlebars

Figure 7. The half-moon cut-
out on the cable end

Figure 8. Hand-tightening the
locking nut

Advertising