Checkline DTMX User Manual

Page 14

Advertising
background image

14

6.00 BUILT-IN MEMORY SYSTEM

The DTMX Built-In Memory system can be configured to operate in one of the
following modes: Standard Memory, Standard Memory With No Auto Power
Off, On-Demand Data Logging
and Continuous Data Logging. The latter two
are part of the Extended Memory. Data recorded in the Standard Memory or
the Extended Memory can be recalled to the LCD Display for viewing or down-
loaded to a printer or PC. To set the Memory Mode, refer to Configuring Dip
Switches, Section 5.30.

6.10 Standard Memory Mode

The DTMX takes 62 tension measurements per second and displays the aver-
age of these measurements over a user-selected Display Update Rate of 0.5, 1,
2 or 4 seconds. The Standard Memory system checks each displayed value and
retains the Maximum, Minimum and Peak tension values which occurred dur-
ing the Measuring Interval. The Measuring Interval is started and stopped by
pressing the key.

Maximum Value: highest displayed
value during measuring interval

Minimum Value: lowest displayed
value during measuring interval

Peak Value: highest transient value
of all of the measurements used to
calculate each displayed value

Note: The “M” indicator on the LCD display will flash on and off, indicating
that the Standard Memory system is activated.

To Start/Stop measuring interval for Standard Memory, press

STORE

STORE

7.00 DOWNLOADING DATA

When configured for either Continuous Data Logging Memory Mode or On-
Demand Data Logging Memory Mode
, the recorded data can be downloaded for
record-keeping purposes using the DTMX Serial and Analog outputs.

7.10 Output Cables

The DTMX is supplied with a special 10-pin high-density connector for down-
loading data. A mating connector is provided for user-supplied cables or with
the following optionally available cables:

CS-DTMX: Serial Cable (10' length) for connection to PC's or other serial

recording devices. It is supplied with a DB9 serial connector and a DB9/25
adapter.

CA-DTMX: Analog Cable (10' length) for connection to Chart Recorders or

other analog recording devices including PC's with Analog-to-Digital
Converter cards. It is supplied with two bare leads.

19

1342 1425 73645

635 8997 1872 xfw

17384 786yt 5430

12345 8 990y765

32109 67543 56321

1342 1425 73645

635 8997 1872 xfw

17384 786yt 5430

12345 8 990y765

32109 67543 56321

1342 1425 73645

635 8997 1872 xfw

17384 786yt 5430

12345 8 990y765

1342 1425 73645

635 8997 1872 xfw

17384 786yt 5430

12345 8 990y765

Power

CHECK•LINE

Computer

Printer

Chart Recorder

Advertising