Checkline DIS-RL - Manual (Page 2)

page 11 page 2
TORQUE MEASUREMENT TORQUE MEASUREMENT
List of Equipment
Torque Tester Display Unit
Screwdriver Sensor
2 Phillips tips
Cable
AC adapter/charger
Carrying Case
Digital Torque Tester/Wrench
Model DIS-TW20 Accuracy: ±0.5% F.S., ±1 LSD
Read First: Safety Information
For safety, and for damage avoidance, be sure to read this manual
thoroughly. The warranty is only valid when the product is used fol-
lowing the instructions provided within this manual.
● Do not use tester in high temperature, high humidity, or in a
damp or wet areas.
● Recommended operating temperature is between 0-42ºC (32-
100ºF).
● Do not apply a torque exceeding the rated capacity (180 lbf-in),
regardless of whether the unit is On or Off. Avoid shock load.
Do not use with impact wrenches.
● When charging the battery, be sure to use only the provided AC
adapter/charger exclusively.
● Do not use lacquer thinner or any solvent to clean the unit.
● Do not disassemble or modify the unit.
1
2
3
4
5
6
6 1
2
4
3
5
Model Capacity
lbf-in kgf-cm N-cm N-m
DIS-RL2 0.10~17.40 0.10~20.00 1.0~200.0 —
DIS-RL10 1.0~90.0 1.0~100.0 10~1000 0.10~10.00
DIS-RL
Specifications subject to change without notice
DIMENSIONS