Checkline BM - Manual (Page 12)

ECE-BA-e-0711 12
7 Operation
7.1 Weighing
•
The balance is switched on by pressing the "ON/OFF" key.
•
The balance performs auto-diagnostics (for 2 s) and then displays "0.00".
•
If the weighing object is heavier than the weighing range the display indicates
"E" (=Overload).
•
The balance is switched off by pressing the "ON/OFF" key once.
7.2 Taring (TARE key)
•
Switch the balance with the “ON/OFF” key on and wait until display appears
as "0.00". Position the tare load and press the “TARE” key.
•
The balance display becomes "0.00".
•
The item to be weighed can now be placed in the tare container and the
weight can be read off.