Test image transfer from the nucleocounter, Testimage <-> pc – ChemoMetec NC-100 User Manual
Page 61
Advertising
7 Troubleshooting
51
The following procedure shows this.
7.2.1
Test Image transfer from the NucleoCounter.
Press <F> <5> <1> on the keyboard of the NucleoCounter.
Press enter < >.
The display of the NucleoCounter shows for 1 -2 seconds
1
2
3
4
Testimage <-> PC
When the NucleoCounter responds with “Ready” again in the display, the
NucleoView display will appear like
Advertising
This manual is related to the following products: