Casio XJ-H1600 - Manual (Page 14)

E-12
Getting Ready
Important! Important! Important!
z Be sure to use alkaline batteries only.
Replacing Remote Controller Batteries
Open the battery cover on the back of the remote controller, replace the old batteries with new ones, and
then close the battery cover.
Important! Important! Important!
z To avoid running down the batteries, store the remote control unit so its buttons are not
pressed inadvertently.
Place the projector onto a table, desk, or stand that is level and firm, making sure you allow enough room
around it. Best results can be obtained when the projector is pointed directly at the screen, and not at an
angle.
z The projector can be configured for projection from the back of a screen. For details, see the User’s
Guide on the CD-ROM that comes with the projector.
Loading Remote Controller Batteries
*
Caution
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
1. Open the battery cover on the back of
the remote controller. 2. Load two new batteries into the case,
making sure that their positive (+) and
negative (–) ends are facing correctly.
3. Close the battery cover on the back of the remote controller.
Setting Up the Projector
XJ-H1600/XJ-H1650/XJ-H1700/XJ-H1750 XJ-ST145/XJ-ST155
Screen Screen
C