COP-USA CM259VAIR-WF - Manual (Page 37)

4 Other
4.1 LAN and WAN configuration
i LAN automatically search
Run DVS Client, Click , the video server in the local LAN will appear in the
device list. Only PC and video server in same network segment can connect.
If there are no device in the device list, make sure the following question:
If DVS is already powered? ķ
If DVS and PC have been normal connected? If yes, the light will be long bright or ĸ
flashing.
If PC has firewall working? If yes, should do it aga Ĺ in after closing the firewall.
i WAN manually search
If users want to login in another subnet, the device can not automatically be searched.
The video device should be manually added as the following steps:
Register DDNS services from a DDNS service provi ķ der. After applications a
domain name will be assigned, and an account number and password will be obtained.
Click mouse right key in device list up item, choose ĸ ǏPropertyǐ ĺǏDDNSǐ set
your domain info ,please see 3.3.2 for details.
When Internet IP is Ĺ changed. The device will automatically tell DDNS server its
new Internet IP.
Users only input domain in the network browser can run Client. ĺ
4.2 Application for DDNS
Normally users use dynamic IP address in the internet. User can use a static
hostname instead of a dynamic IP address to monitor Lan device image. In this way, user
should register a domain name and obtain a password. The device supports
www.3322.org and www.dyndns.org , users can login it and register the domain, after
doing it, set your domain info as 3.3.2 for details.
4.3 Router configuration
Routers must be set to enable a PC TCP connecting to the device. Routers use port
number to decide which device request is allowed, this function is port transmitting or
Design and specification are subject to change without prior notice 35