COP-USA ALC-WF - Manual (Page 22)

7.1.1. 3 Video Switch On Group
The user can set many groups as required, and display the videos by group or in circle.
Figure (18)
The setting steps for video switch on group are as below:
Note: The video switch on group can only be conducted when you automatically logon
the server.
Solution 1: Set the group in the Video Switch On Group setting box (take the setting of
Group 1 as an example)
Step 1: Set the video server to automatically logon this software.
In the software screen, select the video server, and then right click the mouse, and
then select the 『 Properties』. The dialogue box 『 Change Server Parameters』 will pop
up.
Check the box Enable Auto Logon, and then input the correct user name and
password after the 『 User Name』 and 『 Password』 boxes, and then click 『 OK』 ，