COP-USA AU40MZ - Manual (Page 16)

16
Problem
REASONS
PROBABLY
Possible Solution
No Video No power supply
1．Check the connection of power
line
2．If the power supply is DC12V
Can not control the
appoint dome or Pan/Tilt
1.Incorrect protocol
2.Incorrect baud rate
3.Incorrect address
1.The protocol is same between
keyboard and dome or Pan/Tilt?
2.The baud rate is the same between
keyboard and dome or Pan/Tilt?
NOTE: The above lists some common causes problems, as well as solutions for
reference purposes only. If you encounter other specific problems, you can consult
directly with dealers, the request for technical support.