COP-USA AU40Z User Manual
Page 3
(Figure 1)
z
Func（1 cam）
：Set special function of the system together with other buttons.
z
Zoom（Full screen）
：Show picture of the camera in full screen.
z
PIP（up arrow）
：Show picture of the camera in PIP mode (Picture-in-Picture).
z
2×2（down arrow）
：Show picture of the camera in 4-frame.
z
3×3（left arrow）
：Show picture of the camera in 9-frame.
z
4×4（right arrow）
：Show picture of the camera in 16-frame.
z
Live：Show live picture of the camera at current mode.
z
Tape：Playback pictures； Function + Tape: Playback video information of VCR.
z
CAM: Select address of the intelligent Speed Dome or multiplexer.
z
CALL: To call the preset position.
z
PRESET
：
To set the preset position.
z
SHOT
：
To set up or call cruising track.
z
TIME
：
Set time for special function.
z AUTO：To control auto-horizontal rotation for pan/tilt.
z
WIDE：To a wide angle.
z
TELE：To turn to a telescopic range.
z
FAR：To make focus far manually.
z
NEAR：To make focus near manually.
z
OPEN：To open iris.
z
CLOSE：To close iris.
z
ON：Switch on the setting of function.
z
OFF：Switch off the setting of function.
z
F1/F2：Auxiliary control buttons.
z
F3：Switching control between intelligent Speed Dome and Multiplexer.
z 0-9: Number key
z CLEAR:To clear inputted data
z
ENTER:To confirm