COP-USA CD55NV-HD22 - Manual (Page 18)

- -
lower than 1Lux, the camera can be switch to the Zero Illuminance state automatically
and icon appears on the screen. You can also set the Zero Illuminance state
manually.
II. Setup of the Menu of the Dome Camera
1. Basic Operation of the Menu
Ø Open the main menu of the setup by the control keyboard or by the matrix via the
operation “Call No. 64 preset position or No.95 preset position”. Besides that,
continuously test No.1 preset position twice in 4 seconds, you can also open the menu;
Through setting No.64 or No.95 preset position in order to close the munu.
Ø When the menu is displayed on the screen, operate “TILT UP”, “TILT DOWN” to move
the cursor to the option to be set, operate “PAN LEFT”, “PAN RIGHT” to modify the
content or the order to enter this option.
Ø All setups on the menu couldn’t be lost even power failure happens.
2. Setup of the Menu
2.1 MAIN MENU
Ø SYSTEM SETUP.
Ø DISPLAY SETUP: to enter the submenu of display of the screen by
which ID display, title display of preset point and display of camera
screen can be set.
Ø CAMERA SETUP: to enter the submenu of setup of normal data of
camera.
Ø MOTTON SETUP: to enter the setup of enhanced function of dome camera.
Ø PRIVACY MASK: to enter the submenu of the camera privacy function setting.
Ø ADVANCE SETUP.
Ø SYSTEM SETTING: to reset the system. The dome will make self-checking function
after it carries out reset function,the station for the dome's reset is AUTO FLIP
-ON/PTZ SPD RATE-ON/ ID DISPLAY-ON/ANGLE DISPLAY-OFF/ DOME LABEL
DISPLAY-OFF/ D-ZOOM-OFF/ PT INTERLOCK –AF AUTO/BLC-OFF/ AUTO
HOME –OFF/ PARK TIME -4MIN/FAN-AUTO/ TIMP DISPAY-OFF
Ø EXIT: to quit the main menu.
MAINMENU
1.<SYSTEM SETUP>
2.<DISPLAY SETUP>
3.<CAMERA SETUP>
4.<MOTTON SETUP>
5.<PRIVACY MASK>
6.<ADVANCE SETUP>
7.SYSTEM RESET
8.EXIT