COP-USA CD56NV-IR - Manual (Page 5)

display of the presser position and the display of the camera itself.
MAI N MENU
1. DI SPLAY SETUP
2. CAMERA SETUP
3. CONTROL SETUP
4. PROGRAM
5. PAL CAMERA
6. CAM DEFAULT SET
7. RESET PT
8. EXI T
2.1.2 CAMERA SETUP： to enter into the sub-menu of the common data
of the camera.
2.1.3 CONTROL SETUP： to enter into the sub-menu of the control data of
the pan/tilt.
2.1.4 PROGRAM： to enter into the sub-menu of the enhance function of
the menu.
2.1.5 PAL CAMERA： to switch modes of PAL/NTSC, being identical with
that of the camera.
2.1.6 CAM DEFAULT SET： to recover to the default setup of the camera.
2.1.7 DOME RESET： to reset the system.
2.1.8 EXIT： to exit the main menu.
2.2 DISPLAY SETUP
2.2.1 ID DISPLAY： when it is set at ON, the monitor shall display the
address of the pan/tilt such as “CAM 001”. The default is ON
when power supply is switched on.
2.2.2 ID POS： to set the display position of the pan/tilt, which can be
at four corners of the screen such as TOP-L (upper left), TOP-R
(upper right), BOTT-R (bottom left) and BOTT-L (bottom right).
2.2.3 TITLE DIS： when it is set at ON, the title of the preset position
can be displayed on the left side of the screen when calling the preset position, such as “NO.001
ABCDEFGH”. If no title of the position, then only “NO. 001” is displayed. The modification of the title
of the preset position can be set at the PROGRAM option on the menu.
2.2.4 TITLE POS： to set the display position of the title of the preset position from the 1st line to the 10th line.
The 1st line is at the top of the screen.
2.2.5 CAM DISPLAY： when it is set at ON, the display of the camera itself can be opened.
2.2.6 RETURN： to return to the main menu.
2.3 CAMERA SETUP
2.3.1 SLOW SHUTTER： frame accumulation function with options of
manual/automatic. Under automatic state when the display of the
camera is opened, ASS shall be displayed on the screen.
2.3.2 BACK LIGHT： backlight compensation open/close.
2.3.3 ICR SHOT： low illumination. ON – manual / AUTO – automatic.
2.3.4 IRIS： to set up automatic iris. AUTO – automatic / MANU – manual.
2.3.5 D-ZOOM：to set up digital zoom. ON – open / OFF – close.
2.3.6 FOCUS： to set up automatic focusing. AUTO – automatic / MANU –
manual.
2.3.7 WB SET： ATW / INDOOR / OUTDOOR / ONEPUSH / AUTO / MANU.
2.3.8 MENU OF CAM： this option is empty.
2.3.9 RETURN： to return to the main menu.
2.4 CONTROL SETUP
2.4.1 AUTO FILP：NULL (no such a function).
2.4.2 ALARM： ON/OFF: Turn on or Turn off the alarm input function.
４