Hardware installation, 1 install hard drive, 2 front panel instructions – COP-USA DVR2304SE-B User Manual
Page 10: 2 hardware installation
Digital Video Recorder User Manual
4
2 Hardware Installation
Notice: Check the unit and the accessories after getting the DVR.
Please don’t power up until the physical installation is complete.
2.1 Install Hard Drive
Notice: 1. This series DVR supports one SATA hard drive. Please use the hard drive the manufacturers recommend specially for security
and safe field. Please refer to “Appendix C Compatible Devices 2”.
2. Please calculate HDD capacity according to the recording setting. Please refer to “Appendix B Calculate Recording Capacity”.
Step1: Unscrew and Open the top cover.
Step2: Connect the power and data cables. Place the HDD onto the bottom case as Fig 2-1.
Step3: Mount the HDD as Fig 2-2.
Note: For installation convenience, please connect the power and data cables first, and then wind the screws to fix the HDD.
Fig 2-1 Connect HDD Fig 2-2 Screw HDD
2.2 Front Panel Instructions
Notice: The front panel descriptions are only for reference; please make the object as the standard.