COP-USA DVR2304SE-SL - Manual (Page 57)

DVR User Manual
51
Step 3: Open IE browser, input IP address, or dynamic domain name and enter. If HTTP port is not 80, add the port number after
IP address or domain name.
Step 4: IE will download ActiveX automatically. Then a window pops up and asks for user name and password. Input name and
password correctly, and enter to view.
Note: If you cannot download and install ActiveX, please refer to FAQ Q8.
Fig 7-1 View with IE Browser
2. Connect the DVR to internet through PPPoE directly.
Step 1: Enter into the DVR’s Main MenuÆSetupÆNetwork interface to enable PPPoE and then input user name and password
received from your ISP. Next, click ‘Apply’. The DVR will connect to the server and would give a confirmation message.
Step 2: When accessing the remote interface of DVR, user can input WAN IP to access directly (user can enter into Main
menu
ÆInformationÆNetwork interface to check IP address).
Step 3: If users want to utilize dynamic domain name, please apply for a domain name in a DNS server supported by the DVR or
router. Then add to the DVR or router.