COP-USA DVRHRT-16MD - Manual (Page 33)

Digital Video Recorder User Manual
33
hue, saturation and contrast in live; click “default” button to resort
“default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current
Step1: enter into system configurationÆlive configurationÆmain monitor; refer to Fig 4-8:
Fig 4-7 live-color adjustment
Step3: in this interface, user can adjust brightness,
default setting, click “OK” button to save the setting.
Step4: user can setup all channels with same parameters, tick off “all”, then do relevant setup.
Step5: click
interface.
4.2.2 Main monitor
Fig 4-8 live configuration-main monitor
itch
spl
Step2: select split mode: 1Ч1、2Ч2、2Ч3、3Ч3、4Ч4 and channel
Step3: dwell time: the time interval for a certain dwell picture display sw
ing to next dwell picture display
Step4: selected the it mode, then setup current picture group. Click button to setup the previous channel groups of
dwell picture, click button to set the latter channel groups of dwell picture.
Step5: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current