COP-USA DVRMPEG4-16LAN User Manual

Page 14

Advertising
background image

19 pins are in the other row). Make sure pins are plugged into interface exactly.

④

Connect the power supply to HDD

Sketch map of installation
Close the device cover and lock it by screws

Attention

:

⒈ Please format the HDD before you using.

⒉ If the user wants to connect the CD/DVD driver to the ATA interface, please choose

the secondary interface, that is near the center of the motherboard. Furthermore, the CD/DVD driver

must be set as master, and the HDD which is connected to same ATA interface with the

CD-RW/DVD-RW must be set as slave.

⒊

Any CD/DVD driver connected to DVR must be set as master, containing USB CD/DVD

driver and IDE CD/DVD driver.

⒋

The CD/DVD driver connected to ATA interface can be viewed in the STATUS or STORAGE

menu of DVR, the CD/DVD driver connected to USB interface can not be viewed in the menu of DVR.

⒌

The CD/DVD driver is optional, depending on the user. If user connects CD/DVD driver to

ATA interface, the max number of HDD that connects to ATA interface is three.

14

Advertising
This manual is related to the following products: